Links Top Level Elements Executors Connectors Containers Nested Components Cluster Elements web.xml Other | The Context ContainerIntroduction |
The description below uses the variable name $CATALINA_BASE to refer the
base directory against which most relative paths are resolved. If you have
not configured Tomcat for multiple instances by setting a CATALINA_BASE
directory, then $CATALINA_BASE will be set to the value of $CATALINA_HOME,
the directory into which you have installed Tomcat.
The Context element represents a web
application, which is run within a particular virtual host.
Each web application is based on a Web Application Archive
(WAR) file, or a corresponding directory containing the corresponding
unpacked contents, as described in the Servlet Specification (version
2.2 or later). For more information about web application archives,
you can download the
Servlet
Specification, and review the Tomcat
Application Developer's Guide.
The web application used to process each HTTP request is selected
by Catalina based on matching the longest possible prefix of the
Request URI against the context path of each defined Context.
Once selected, that Context will select an appropriate servlet to
process the incoming request, according to the servlet mappings defined
by the web application deployment.
You may define as many Context elements as you
wish. Each such Context MUST have a unique context name within a virtual
host. The context path does not need to be unique (see parallel
deployment below). In addition, a Context must be present with a
context path equal to
a zero-length string. This Context becomes the default
web application for this virtual host, and is used to process all
requests that do not match any other Context's context path.
Parallel deployment |
You may deploy multiple versions of a web application with the same
context path at the same time. The rules used to match requests to a
context version are as follows:
- If no session information is present in the request, use the latest
version.
- If session information is present in the request, check the session
manager of each version for a matching session and if one is found, use that
version.
- If session information is present in the request but no matching session
can be found, use the latest version.
The Host may be configured (via the
undeployOldVersions ) to remove old versions deployed in this way
once they are no longer in use.
|
Naming |
When autoDeploy or deployOnStartup operations
are performed by a Host, the name and context path of the web application are
derived from the name(s) of the file(s) that define(s) the web application.
Consequently, the context path may not be defined in a
META-INF/context.xml embedded in the application and there is a
close relationship between the context name, context path,
context version and the base file name (the name minus any
.war or .xml extension) of the file.
If no version is specified then the context name is always the
same as the context path. If the context path is the empty
string then the base name will be ROOT (always in upper case)
otherwise the base name will be the context path with the
leading '/' removed and any remaining '/' characters replaced with '#'.
If a version is specified then the context path remains unchanged
and both the context name and the base name have the string
'##' appended to them followed by the version identifier.
Some examples of these naming conventions are given below.
Context Path |
Context Version |
Context Name |
Base File Name |
Example File Names (.xml, .war & directory) |
/foo |
None |
/foo |
foo |
foo.xml, foo.war, foo |
/foo/bar |
None |
/foo/bar |
foo#bar |
foo#bar.xml, foo#bar.war, foo#bar |
Empty String |
None |
Empty String |
ROOT |
ROOT.xml, ROOT.war, ROOT |
/foo |
42 |
/foo##42 |
foo##42 |
foo##42.xml, foo##42.war, foo##42 |
/foo/bar |
42 |
/foo/bar##42 |
foo#bar##42 |
foo#bar##42.xml, foo#bar##42.war, foo#bar##42 |
Empty String |
42 |
##42 |
ROOT##42 |
ROOT##42.xml, ROOT##42.war, ROOT##42 |
The version component is treated as a String both for
performance reasons and to allow flexibility in versioning schemes. String
comparisons are used to determine version order. If version is not specified,
it is treated as the empty string.
Therefore,
foo.war will be treated as an earlier version than
foo##11.war and
foo##11.war will be treated as an earlier version than
foo##2.war . If using a purely numerical versioning scheme it is
recommended that zero padding is used so that foo##002.war is
treated as an earlier version than foo##011.war .
If you want to deploy a WAR file or a directory using a context path that
is not related to the base file name then one of the following options must
be used to prevent double-deployment:
- Disable autoDeploy and deployOnStartup and define all
Contexts in server.xml
- Locate the WAR and/or directory outside of the Host's appBase and use
a context.xml file with a docBase attribute to define it.
|
Defining a context |
It is NOT recommended to place <Context> elements directly in the
server.xml file. This is because it makes modifying the
Context configuration more invasive since the main
conf/server.xml file cannot be reloaded without restarting
Tomcat. Default Context elements (see below) will also
overwrite the configuration of any <Context> elements
placed directly in server.xml. To prevent this, the override
attribute of the <Context> element defined in server.xml should be set
to true .
Individual Context elements may be explicitly defined:
- In an individual file at
/META-INF/context.xml inside the
application files. Optionally (based on the Host's copyXML attribute)
this may be copied to
$CATALINA_BASE/conf/[enginename]/[hostname]/ and renamed to
application's base file name plus a ".xml" extension.
- In individual files (with a ".xml" extension) in the
$CATALINA_BASE/conf/[enginename]/[hostname]/ directory.
The context path and version will be derived from the base name of the file
(the file name less the .xml extension). This file will always take precedence
over any context.xml file packaged in the web application's META-INF
directory.
- Inside a Host element in the main
conf/server.xml .
Default Context elements may be defined that apply to
multiple web applications. Configuration for an individual web application
will override anything configured in one of these defaults. Any nested
elements, e.g. <Resource> elements, that are defined in a default
Context will be created once for each
Context to which the default applies. They will not be
shared between Context elements.
- In the
$CATALINA_BASE/conf/context.xml file:
the Context element information will be loaded by all web applications.
- In the
$CATALINA_BASE/conf/[enginename]/[hostname]/context.xml.default
file: the Context element information will be loaded by all web applications
of that host.
With the exception of server.xml, files that define Context
elements may only define a single Context element.
In addition to explicitly specified Context elements, there are
several techniques by which Context elements can be created automatically
for you. See
Automatic Application Deployment and
User Web Applications
for more information.
To define multiple contexts that use a single WAR file or directory,
use one of the options described in the Naming
section above for creating a Context that has a path
that is not related to the base file name.
|
|
Attributes |
Common Attributes |
All implementations of Context
support the following attributes:
Attribute | Description |
---|
allowCasualMultipartParsing |
Set to true if Tomcat should automatically parse
multipart/form-data request bodies when HttpServletRequest.getPart*
or HttpServletRequest.getParameter* is called, even when the
target servlet isn't marked with the @MultipartConfig annotation
(See Servlet Specification 3.0, Section 3.2 for details).
Note that any setting other than false causes Tomcat
to behave in a way that is not technically spec-compliant.
The default is false
| allowMultipleLeadingForwardSlashInPath |
Tomcat normalises sequences of multiple / characters in
a URI to a single / . This is for consistencuy with the
behaviour of file systems as URIs are often translated to file system
paths. As a result, the return value of
HttpServletRequest#getContextPath() is expected to start
with multiple / characters for some URIs. This will cause
problems if this value is used directly with
HttpServletResponse#sendRedirect() as redirect paths that
start with // are treated as protocol relative redirects.
To avoid potential issues, Tomcat will collapse multiple leading
/ characters at the start of the return value for
HttpServletRequest#getContextPath() to a single
/ . This attribute has a default value of false
which enables the collapsing of multiple / characters. To
disable this behaviour, set this attribute to true .
| altDDName |
The absolute path to the alternative deployment descriptor for this
context. This overrides the default deployment descriptor located at
/WEB-INF/web.xml .
| backgroundProcessorDelay |
This value represents the delay in seconds between the
invocation of the backgroundProcess method on this context and
its child containers, including all wrappers.
Child containers will not be invoked if their delay value is not
negative (which would mean they are using their own processing
thread). Setting this to a positive value will cause
a thread to be spawn. After waiting the specified amount of time,
the thread will invoke the backgroundProcess method on this host
and all its child containers. A context will use background
processing to perform session expiration and class monitoring for
reloading. If not specified, the default value for this attribute is
-1, which means the context will rely on the background processing
thread of its parent host.
| className |
Java class name of the implementation to use. This class must
implement the org.apache.catalina.Context interface.
If not specified, the standard value (defined below) will be used.
| containerSciFilter |
The regular expression that specifies which container provided SCIs
should be filtered out and not used for this context. Matching uses
java.util.regex.Matcher.find() so the regular expression
only has to match a sub-string of the fully qualified class name of the
container provided SCI for it to be filtered out. If not specified,
no filtering will be applied.
| cookies |
Set to true if you want cookies to be used for
session identifier communication if supported by the client (this
is the default). Set to false if you want to disable
the use of cookies for session identifier communication, and rely
only on URL rewriting by the application.
| createUploadTargets |
Set to true if Tomcat should attempt to create the
temporary upload location specified in the MultipartConfig
for a Servlet if the location does not already exist. If not specified,
the default value of false will be used.
| crossContext |
Set to true if you want calls within this application
to ServletContext.getContext() to successfully return a
request dispatcher for other web applications running on this virtual
host. Set to false (the default) in security
conscious environments, to make getContext() always
return null .
| docBase |
The Document Base (also known as the Context
Root) directory for this web application, or the pathname
to the web application archive file (if this web application is
being executed directly from the WAR file). You may specify
an absolute pathname for this directory or WAR file, or a pathname
that is relative to the appBase directory of the
owning Host.
The value of this field must not be set unless the Context element is
defined in server.xml or the docBase is not located under
the Host's appBase .
If a symbolic link is used for docBase then changes to the
symbolic link will only be effective after a Tomcat restart or
by undeploying and redeploying the context. A context reload is not
sufficient.
| dispatchersUseEncodedPaths |
Controls whether paths used in calls to obtain a request dispatcher
ares expected to be encoded. This affects both how Tomcat handles calls
to obtain a request dispatcher as well as how Tomcat generates paths
used to obtain request dispatchers internally. If not specified, the
default value of true is used.
| failCtxIfServletStartFails |
Set to true to have the context fail its startup if any
servlet that has load-on-startup >=0 fails its own startup.
If not specified, the attribute of the same name in the parent Host
configuration is used if specified. Otherwise the default value of
false is used.
| fireRequestListenersOnForwards |
Set to true to fire any configured
ServletRequestListeners when Tomcat forwards a request. This is
primarily of use to users of CDI frameworks that use
ServletRequestListeners to configure the necessary environment for a
request. If not specified, the default value of false is
used.
| logEffectiveWebXml |
Set to true if you want the effective web.xml used for a
web application to be logged (at INFO level) when the application
starts. The effective web.xml is the result of combining the
application's web.xml with any defaults configured by Tomcat and any
web-fragment.xml files and annotations discovered. If not specified, the
default value of false is used.
| mapperContextRootRedirectEnabled |
If enabled, requests for a web application context root will be
redirected (adding a trailing slash) if necessary by the Mapper rather
than the default Servlet. This is more efficient but has the side effect
of confirming that the context path exists. If not specified, the
default value of true is used.
| mapperDirectoryRedirectEnabled |
If enabled, requests for a web application directory will be
redirected (adding a trailing slash) if necessary by the Mapper rather
than the default Servlet. This is more efficient but has the side effect
of confirming that the directory is exists. If not specified, the
default value of false is used.
| override |
Set to true to ignore any settings in both the global
or Host default contexts. By default, settings
from a default context will be used but may be overridden by a setting
the same attribute explicitly for the Context.
| path |
The context path of this web application, which is
matched against the beginning of each request URI to select the
appropriate web application for processing. All of the context paths
within a particular Host must be unique.
If you specify a context path of an empty string (""), you are
defining the default web application for this Host, which
will process all requests not assigned to other Contexts.
This attribute must only be used when statically defining a Context
in server.xml. In all other circumstances, the path will be inferred
from the filenames used for either the .xml context file or the docBase.
Even when statically defining a Context in server.xml, this attribute
must not be set unless either the docBase is not located under the
Host's appBase or both
deployOnStartup and autoDeploy are false. If
this rule is not followed, double deployment is likely to result.
| preemptiveAuthentication |
When set to true and the user presents credentials for a
resource that is not protected by a security constraint, if the
authenticator supports preemptive authentication (the standard
authenticators provided with Tomcat do) then the user' credentials
will be processed. If not specified, the default of false is
used.
| privileged |
Set to true to allow this context to use container
servlets, like the manager servlet. Use of the privileged
attribute will change the context's parent class loader to be the
Server class loader rather than the Shared class
loader. Note that in a default installation, the Common class
loader is used for both the Server and the Shared
class loaders.
| reloadable |
Set to true if you want Catalina to monitor classes in
/WEB-INF/classes/ and /WEB-INF/lib for
changes, and automatically reload the web application if a change
is detected. This feature is very useful during application
development, but it requires significant runtime overhead and is
not recommended for use on deployed production applications. That's
why the default setting for this attribute is false. You
can use the Manager web
application, however, to trigger reloads of deployed applications
on demand.
| resourceOnlyServlets |
Comma separated list of Servlet names (as used in
/WEB-INF/web.xml ) that expect a resource to be present.
Ensures that welcome files associated with Servlets that expect a
resource to be present (such as the JSP Servlet) are not used when there
is no resource present. This prevents issues caused by the clarification
of welcome file mapping in section 10.10 of the Servlet 3.0
specification. If the
org.apache.catalina.STRICT_SERVLET_COMPLIANCE
system property is set to
true , the default value of this attribute will be the empty
string, else the default value will be jsp .
| sendRedirectBody |
If true , redirect responses will include a short
response body that includes details of the redirect as recommended by
RFC 2616. This is disabled by default since including a response body
may cause problems for some application component such as compression
filters.
| sessionCookieDomain |
The domain to be used for all session cookies created for this
context. If set, this overrides any domain set by the web application.
If not set, the value specified by the web application, if any, will be
used.
| sessionCookieName |
The name to be used for all session cookies created for this
context. If set, this overrides any name set by the web application.
If not set, the value specified by the web application, if any, will be
used, or the name JSESSIONID if the web application does
not explicitly set one.
| sessionCookiePath |
The path to be used for all session cookies created for this
context. If set, this overrides any path set by the web application.
If not set, the value specified by the web application will be used, or
the context path used if the web application does not explicitly set
one. To configure all web application to use an empty path (this can be
useful for portlet specification implementations) set this attribute to
/ in the global CATALINA_BASE/conf/context.xml
file.
Note: Once one web application using
sessionCookiePath="/" obtains a session, all
subsequent sessions for any other web application in the same host also
configured with sessionCookiePath="/" will always
use the same session ID. This holds even if the session is invalidated
and a new one created. This makes session fixation protection more
difficult and requires custom, Tomcat specific code to change the
session ID shared by the multiple applications.
| sessionCookiePathUsesTrailingSlash |
Some browsers, such as Internet Explorer, Safari and Edge, will send
a session cookie for a context with a path of /foo with a
request to /foobar in violation of RFC6265. This could
expose a session ID from an application deployed at /foo to
an application deployed at /foobar . If the application
deployed at /foobar is untrusted, this could create a
security risk. However, it should be noted that RFC 6265, section 8.5
makes clear that path alone should not be view as sufficient to prevent
untrusted applications accessing cookies from other applications. To
mitigate this risk, this attribute may be set to true and
Tomcat will add a trailing slash to the path associated with the session
cookie so, in the above example, the cookie path becomes /foo/. However,
with a cookie path of /foo/, browsers will no longer send the cookie
with a request to /foo. This should not be a problem unless there is a
servlet mapped to /*. In this case this attribute will need to be set to
false to disable this feature. The default value for this
attribute is false .
| swallowAbortedUploads |
Set to false if Tomcat should not read any additional request
body data for aborted uploads and instead abort the client connection.
This setting is used in the following situations:
- the size of the request body is larger than the
maxPostSize configured in the connector
- the size limit of a MultiPart upload is reached
- the servlet sets the response status to 413 (Request Entity Too
Large)
Not reading the additional data will free the request processing thread
more quickly. Unfortunately most HTTP clients will not read the response
if they can not write the full request.
The default is true , so additional data will be
read.
Note if an error occurs during the request processing that triggers
a 5xx response, any unread request data will always be ignored and the
client connection will be closed once the error response has been
written.
| swallowOutput |
If the value of this flag is true , the bytes output to
System.out and System.err by the web application will be redirected to
the web application logger. If not specified, the default value
of the flag is false .
| tldValidation |
If the value of this flag is true , the TLD files
will be XML validated on context startup. If the
org.apache.catalina.STRICT_SERVLET_COMPLIANCE
system property is set to
true , the default value of this attribute will be
true , else the default value will be false .
Setting this attribute to true will incur a performance
penalty.
| useHttpOnly |
Should the HttpOnly flag be set on session cookies to prevent client
side script from accessing the session ID? Defaults to
true .
| useRelativeRedirects |
Controls whether HTTP 1.1 and later location headers generated by a
call to
javax.servlet.http.HttpServletResponse#sendRedirect(String)
will use relative or absolute redirects. Relative redirects are more
efficient but may not work with reverse proxies that change the context
path. It should be noted that it is not recommended to use a reverse
proxy to change the context path because of the multiple issues it
creates. Absolute redirects should work with reverse proxies that change
the context path but may cause issues with the
org.apache.catalina.filters.RemoteIpFilter if the filter is
changing the scheme and/or port. If the
org.apache.catalina.STRICT_SERVLET_COMPLIANCE
system property is set to
true , the default value of this attribute will be
false , else the default value will be true .
| validateClientProvidedNewSessionId |
When a client provides the ID for a new session, this attribute
controls whether that ID is validated. The only use case for using a
client provided session ID is to have a common session ID across
multiple web applications. Therefore, any client provided session ID
should already exist in another web application. If this check is
enabled, the client provided session ID will only be used if the session
ID exists in at least one other web application for the current host.
Note that the following additional tests are always applied,
irrespective of this setting:
- The session ID is provided by a cookie
- The session cookie has a path of {@code /}
If not specified, the default value of true will be
used.
| wrapperClass |
Java class name of the org.apache.catalina.Wrapper
implementation class that will be used for servlets managed by this
Context. If not specified, a standard default value will be used.
| xmlBlockExternal |
If the value of this flag is true , the parsing of
web.xml , web-fragment.xml , *.tld ,
*.jspx , *.tagx and tagPlugins.xml
files for this web application will not permit external entities to be
loaded. If not specified, the default value of true will
be used.
| xmlNamespaceAware |
If the value of this flag is true , the parsing of
web.xml and web-fragment.xml files for this
web application will be namespace-aware. Note that *.tld ,
*.jspx and *.tagx files are always parsed
using a namespace-aware parser and that the tagPlugins.xml
file (if any) is never parsed using a namespace-aware parser. Note also
that if you turn this flag on, you should probably also turn
xmlValidation on. If the
org.apache.catalina.STRICT_SERVLET_COMPLIANCE
system property is set to
true , the default value of this attribute will be
true , else the default value will be false .
Setting this attribute to true will incur a performance
penalty.
| xmlValidation |
If the value of this flag is true , the parsing of
web.xml and web-fragment.xml files for this
web application will use a validating parser. If the
org.apache.catalina.STRICT_SERVLET_COMPLIANCE
system property is set to
true , the default value of this attribute will be
true , else the default value will be false .
Setting this attribute to true will incur a performance
penalty.
|
|
Standard Implementation |
The standard implementation of Context is
org.apache.catalina.core.StandardContext.
It supports the following additional attributes (in addition to the
common attributes listed above):
Attribute | Description |
---|
addWebinfClassesResources |
This attribute controls if, in addition to static resources being
served from META-INF/resources inside web application JAR
files, static resources are also served from
WEB-INF/classes/META-INF/resources . This only applies to
web applications with a major version of 3 or higher. Since this is a
proprietary extension to the Servlet 3 specification, it is disabled by
default. To enable this feature, set the attribute to true .
| aliases |
This attribute provides a list of external locations from which to
load resources for this context. The list of aliases should be of
the form "/aliasPath1=docBase1,/aliasPath2=docBase2" where
aliasPathN must include a leading '/' and
docBaseN must be an absolute path to either a .war file or
a directory.
Whitespace is permitted around both the , and
= delimiters, and will be trimmed. Therefore, an aliases
attribute with the value "/aliasPath1 = docBase1,
/aliasPath2= docBase2" is equivalent to
"/aliasPath1=docBase1,/aliasPath2=docBase2"
A resource will be searched for in the first docBaseN
for which aliasPathN is a leading path segment of the
resource. If there is no such alias, then the resource will be searched
in the usual way.
Using '/' as an aliasPath is not allowed. Consider using
docBase instead.
These external locations will not be emptied if the context
is un-deployed.
A more powerful feature (for development only) is
Virtual webapp.
| allowLinking |
If the value of this flag is true , symlinks will be
allowed inside the web application, pointing to resources inside or
outside the web application base path. If not specified, the default
value of the flag is false .
NOTE: This flag MUST NOT be set to true on the Windows platform
(or any other OS which does not have a case sensitive filesystem),
as it will disable case sensitivity checks, allowing JSP source code
disclosure, among other security problems.
| antiJARLocking |
If true, the Tomcat classloader will take extra measures to avoid
JAR file locking when resources are accessed inside JARs through URLs.
This will impact startup time of applications, but could prove to be
useful on platforms or configurations where file locking can occur.
If not specified, the default value is false .
antiJARLocking is a subset of
antiResourceLocking and therefore, to prevent duplicate
work and possible issues, only one of these attributes should be set
to true at any one time.
| antiResourceLocking |
If true, Tomcat will prevent any file locking.
This will significantly impact startup time of applications,
but allows full webapp hot deploy and undeploy on platforms
or configurations where file locking can occur.
If not specified, the default value is false .
antiJARLocking is a subset of
antiResourceLocking and therefore, to prevent duplicate
work and possible issues, only one of these attributes should be set
to true at any one time.
Please note that setting this to true has some side
effects, including the disabling of JSP reloading in a running server:
see
Bugzilla 37668.
Please note that setting this flag to true in applications that are
outside the appBase for the Host (the webapps directory
by default) will cause the application to be deleted on
Tomcat shutdown. You probably don't want to do this, so think twice
before setting antiResourceLocking=true on a webapp that's outside the
appBase for its Host.
| cacheMaxSize |
Maximum size of the static resource cache in kilobytes.
If not specified, the default value is 10240
(10 megabytes).
| cacheObjectMaxSize |
Maximum size of the static resource that will be placed in the cache.
If not specified, the default value is 512
(512 kilobytes). If this value is greater than
cacheMaxSize/20 it will be reduced to
cacheMaxSize/20 .
| cacheTTL |
Amount of time in milliseconds between cache entries revalidation.
If not specified, the default value is 5000
(5 seconds).
| cachingAllowed |
If the value of this flag is true , the cache for static
resources will be used. If not specified, the default value
of the flag is true .
| clearReferencesHttpClientKeepAliveThread |
If true and an sun.net.www.http.HttpClient
keep-alive timer thread has been started by this web application and is
still running, Tomcat will change the context class loader for that
thread from the current WebappClassLoader to
WebappClassLoader#parent to prevent a memory leak. Note
that the keep-alive timer thread will stop on its own once the
keep-alives all expire however, on a busy system that might not happen
for some time. If not specified, the default value of
true will be used.
| clearReferencesObjectStreamClassCaches |
If true , when the web application is stopped Tomcat
looks for SoftReference s to classes loaded by the web
application in the ObjectStreamClass class used for
serialization and clears any SoftReference s it finds. This
feature uses reflection to identify the SoftReference s and
therefore requires that the command line option
-XaddExports:java.base/java.io=ALL-UNNAMED is set
when running on Java 9 and above. If not specified, the default value of
true will be used.
| clearReferencesRmiTargets |
If true , Tomcat looks for memory leaks associated with
RMI Targets and clears any it finds. This feature uses reflection to
identify the leaks and therefore requires that the command line option
-XaddExports:java.rmi/sun.rmi.transport=ALL-UNNAMED is set
when running on Java 9 and above. Applications without memory leaks
should operate correctly with this attribute set to false .
If not specified, the default value of true will be used.
| clearReferencesStatic |
If true , Tomcat attempts to null out any static or final
fields from loaded classes when a web application is stopped as a work
around for apparent garbage collection bugs and application coding
errors. There have been some issues reported with log4j when this
is true . Applications without memory leaks using recent
JVMs should operate correctly with this attribute set to
false . If not specified, the default value of
false will be used.
This attribute has been deprecated and will be removed in Tomcat
8.5.
| clearReferencesStopThreads |
If true , Tomcat attempts to terminate threads that have
been started by the web application. Stopping threads is performed via
the deprecated (for good reason) Thread.stop() method and
is likely to result in instability. As such, enabling this should be
viewed as an option of last resort in a development environment and is
not recommended in a production environment. If not specified, the
default value of false will be used. If this feature is
enabled, web applications may take up to two seconds longer to stop as
executor threads are given up to two seconds to stop gracefully before
Thread.stop() is called on any remaining threads.
| clearReferencesStopTimerThreads |
If true , Tomcat attempts to terminate
java.util.Timer threads that have been started by the web
application. Unlike standard threads, timer threads can be stopped
safely although there may still be side-effects for the application. If
not specified, the default value of false will be used.
| clearReferencesThreadLocals |
If true , Tomcat attempts to clear
java.lang.ThreadLocal variables that have been populated
with classes loaded by the web application. If not specified, the
default value of true will be used.
| copyXML |
Set to true if you want a context XML descriptor
embedded inside the application (located at
/META-INF/context.xml ) to be copied to the owning
Host's xmlBase when the application
is deployed. On subsequent starts, the copied context XML descriptor
will be used in preference to any context XML descriptor embedded inside
the application even if the descriptor embedded inside the application
is more recent. The flag's value defaults to false . Note if
the deployXML attribute of the owning
Host is false or if the
copyXML attribute of the owning
Host is true , this attribute will
have no effect.
| jndiExceptionOnFailedWrite |
If true , any attempt by an application to modify the
provided JNDI context with a call to bind(), unbind(),
createSubContext(), destroySubContext() or close() will trigger a
javax.naming.OperationNotSupportedException as required by
section EE.5.3.4 of the Java EE specification. This exception can be
disabled by setting this attribute to false in which case any calls to
modify the JNDI context will return without making any changes
and methods that return values will return null . If not
specified, the specification compliant default of true will
be used.
| processTlds |
Whether the context should process TLDs on startup. The default
is true. The false setting is intended for special cases
that know in advance TLDs are not part of the webapp.
| renewThreadsWhenStoppingContext |
If true , when this context is stopped, Tomcat renews all
the threads from the thread pool that was used to serve this context.
This also requires that the
ThreadLocalLeakPreventionListener be configured in
server.xml and that the threadRenewalDelay
property of the Executor be >=0. If not specified, the
default value of true will be used.
| unloadDelay |
Number of ms that the container will wait for servlets to unload.
If not specified, the default value is 2000 ms.
| unpackWAR |
If false , the unpackWARs attribute of
the owning Host will be overridden and the WAR
file will not be unpacked. If true , the value of the owning
Host's unpackWARs
attribute will determine if the WAR is unpacked. If not specified, the
default value is true .
| useNaming |
Set to true (the default) to have Catalina enable a
JNDI InitialContext for this web application that is
compatible with Java2 Enterprise Edition (J2EE) platform
conventions.
| workDir |
Pathname to a scratch directory to be provided by this Context
for temporary read-write use by servlets within the associated web
application. This directory will be made visible to servlets in the
web application by a servlet context attribute (of type
java.io.File ) named
javax.servlet.context.tempdir as described in the
Servlet Specification. If not specified, a suitable directory
underneath $CATALINA_BASE/work will be provided.
|
|
|
Nested Components |
You can nest at most one instance of the following utility components
by nesting a corresponding element inside your Context
element:
- Loader -
Configure the web application class loader that will be used to load
servlet and bean classes for this web application. Normally, the
default configuration of the class loader will be sufficient.
- Manager -
Configure the session manager that will be used to create, destroy,
and persist HTTP sessions for this web application. Normally, the
default configuration of the session manager will be sufficient.
- Realm -
Configure a realm that will allow its
database of users, and their associated roles, to be utilized solely
for this particular web application. If not specified, this web
application will utilize the Realm associated with the owning
Host or Engine.
- Resources -
Configure the resource manager that will be used to access the static
resources associated with this web application. Normally, the
default configuration of the resource manager will be sufficient.
- WatchedResource - The auto deployer will monitor the
specified static resource of the web application for updates, and will
reload the web application if it is updated. The content of this element
must be a string.
|
Special Features |
Logging |
A context is associated with the
org.apache.catalina.core.ContainerBase.[enginename].[hostname].[path]
log category. Note that the brackets are actually part of the name, don't omit them.
|
Access Logs |
When you run a web server, one of the output files normally generated
is an access log, which generates one line of information for
each request processed by the server, in a standard format. Catalina
includes an optional Valve implementation that
can create access logs in the same standard format created by web servers,
or in any number of custom formats.
You can ask Catalina to create an access log for all requests
processed by an Engine,
Host, or Context
by nesting a Valve element like this:
<Context>
...
<Valve className="org.apache.catalina.valves.AccessLogValve"
prefix="localhost_access_log." suffix=".txt"
pattern="common"/>
...
</Context>
See Access Logging Valves
for more information on the configuration attributes that are
supported.
|
Automatic Context Configuration |
If you use the standard Context implementation,
the following configuration steps occur automatically when Catalina
is started, or whenever this web application is reloaded. No special
configuration is required to enable this feature.
- If you have not declared your own Loader
element, a standard web application class loader will be configured.
- If you have not declared your own Manager
element, a standard session manager will be configured.
- If you have not declared your own Resources
element, a standard resources manager will be configured.
- The web application properties listed in
conf/web.xml
will be processed as defaults for this web application. This is used
to establish default mappings (such as mapping the *.jsp
extension to the corresponding JSP servlet), and other standard
features that apply to all web applications.
- The web application properties listed in the
/WEB-INF/web.xml resource for this web application
will be processed (if this resource exists).
- If your web application has specified security constraints that might
require user authentication, an appropriate Authenticator that
implements the login method you have selected will be configured.
|
Context Parameters |
You can configure named values that will be made visible to the
web application as servlet context initialization parameters by nesting
<Parameter> elements inside this element. For
example, you can create an initialization parameter like this:
<Context>
...
<Parameter name="companyName" value="My Company, Incorporated"
override="false"/>
...
</Context>
This is equivalent to the inclusion of the following element in the
web application deployment descriptor (/WEB-INF/web.xml ):
<context-param>
<param-name>companyName</param-name>
<param-value>My Company, Incorporated</param-value>
</context-param>
but does not require modification of the deployment descriptor
to customize this value.
The valid attributes for a <Parameter> element
are as follows:
Attribute | Description |
---|
description |
Optional, human-readable description of this context
initialization parameter.
| name |
The name of the context initialization parameter to be created.
| override |
Set this to false if you do not want
a <context-param> for the same parameter name,
found in the web application deployment descriptor, to override the
value specified here. By default, overrides are allowed.
| value |
The parameter value that will be presented to the application
when requested by calling
ServletContext.getInitParameter() .
|
|
Environment Entries |
You can configure named values that will be made visible to the
web application as environment entry resources, by nesting
<Environment> entries inside this element. For
example, you can create an environment entry like this:
<Context>
...
<Environment name="maxExemptions" value="10"
type="java.lang.Integer" override="false"/>
...
</Context>
This is equivalent to the inclusion of the following element in the
web application deployment descriptor (/WEB-INF/web.xml ):
<env-entry>
<env-entry-name>maxExemptions</env-entry-name>
<env-entry-value>10</env-entry-value>
<env-entry-type>java.lang.Integer</env-entry-type>
</env-entry>
but does not require modification of the deployment descriptor
to customize this value.
The valid attributes for an <Environment> element
are as follows:
Attribute | Description |
---|
description |
Optional, human-readable description of this environment entry.
| name |
The name of the environment entry to be created, relative to the
java:comp/env context.
| override |
Set this to false if you do not want
an <env-entry> for the same environment entry name,
found in the web application deployment descriptor, to override the
value specified here. By default, overrides are allowed.
| type |
The fully qualified Java class name expected by the web application
for this environment entry. Must be a legal value for
<env-entry-type> in the web application deployment
descriptor.
| value |
The parameter value that will be presented to the application
when requested from the JNDI context. This value must be convertable
to the Java type defined by the type attribute.
|
|
Lifecycle Listeners |
If you have implemented a Java object that needs to know when this
Context is started or stopped, you can declare it by
nesting a Listener element inside this element. The
class name you specify must implement the
org.apache.catalina.LifecycleListener interface, and
the class must be packaged in a jar and placed in the
$CATALINA_HOME/lib directory.
It will be notified about the occurrence of the corresponding
lifecycle events. Configuration of such a listener looks like this:
<Context>
...
<Listener className="com.mycompany.mypackage.MyListener" ... >
...
</Context>
Note that a Listener can have any number of additional properties
that may be configured from this element. Attribute names are matched
to corresponding JavaBean property names using the standard property
method naming patterns.
|
Request Filters |
You can ask Catalina to check the IP address, or host name, on every
incoming request directed to the surrounding
Engine, Host, or
Context element. The remote address or name
will be checked against configured "accept" and/or "deny"
filters, which are defined using java.util.regex Regular
Expression syntax. Requests that come from locations that are
not accepted will be rejected with an HTTP "Forbidden" error.
Example filter declarations:
<Context>
...
<Valve className="org.apache.catalina.valves.RemoteHostValve"
allow=".*\.mycompany\.com|www\.yourcompany\.com"/>
<Valve className="org.apache.catalina.valves.RemoteAddrValve"
deny="192\.168\.1\.\d+"/>
...
</Context>
See Remote Address Filter
and Remote Host Filter for
more information about the configuration options that are supported.
|
Resource Definitions |
You can declare the characteristics of the resource
to be returned for JNDI lookups of <resource-ref> and
<resource-env-ref> elements in the web application
deployment descriptor. You MUST also define
the needed resource parameters as attributes of the Resource
element, to configure the object factory to be used (if not known to Tomcat
already), and the properties used to configure that object factory.
For example, you can create a resource definition like this:
<Context>
...
<Resource name="jdbc/EmployeeDB" auth="Container"
type="javax.sql.DataSource"
description="Employees Database for HR Applications"/>
...
</Context>
This is equivalent to the inclusion of the following element in the
web application deployment descriptor (/WEB-INF/web.xml ):
<resource-ref>
<description>Employees Database for HR Applications</description>
<res-ref-name>jdbc/EmployeeDB</res-ref-name>
<res-ref-type>javax.sql.DataSource</res-ref-type>
<res-auth>Container</res-auth>
</resource-ref>
but does not require modification of the deployment
descriptor to customize this value.
The valid attributes for a <Resource> element
are as follows:
Attribute | Description |
---|
auth |
Specify whether the web Application code signs on to the
corresponding resource manager programmatically, or whether the
Container will sign on to the resource manager on behalf of the
application. The value of this attribute must be
Application or Container . This
attribute is required if the web application
will use a <resource-ref> element in the web
application deployment descriptor, but is optional if the
application uses a <resource-env-ref> instead.
| closeMethod |
Name of the zero-argument method to call on a singleton resource when
it is no longer required. This is intended to speed up clean-up of
resources that would otherwise happen as part of garbage collection.
This attribute is ignored if the singleton attribute is
false. If not specified, no default is defined and no close method will
be called.
For Apache Commons DBCP 1.x and Apache Tomcat JDBC connection pools
you can use closeMethod="close" .
| description |
Optional, human-readable description of this resource.
| name |
The name of the resource to be created, relative to the
java:comp/env context.
| scope |
Specify whether connections obtained through this resource
manager can be shared. The value of this attribute must be
Shareable or Unshareable . By default,
connections are assumed to be shareable.
| singleton |
Specify whether this resource definition is for a singleton resource,
i.e. one where there is only a single instance of the resource. If this
attribute is true , multiple JNDI lookups for this resource
will return the same object. If this attribute is false ,
multiple JNDI lookups for this resource will return different objects.
This attribute must be true for
javax.sql.DataSource resources to enable JMX registration
of the DataSource. The value of this attribute must be true
or false . By default, this attribute is true .
| type |
The fully qualified Java class name expected by the web
application when it performs a lookup for this resource.
|
|
Resource Links |
This element is used to create a link to a global JNDI resource. Doing
a JNDI lookup on the link name will then return the linked global
resource.
For example, you can create a resource link like this:
<Context>
...
<ResourceLink name="linkToGlobalResource"
global="simpleValue"
type="java.lang.Integer"
...
</Context>
The valid attributes for a <ResourceLink> element
are as follows:
Attribute | Description |
---|
global |
The name of the linked global resource in the
global JNDI context.
| name |
The name of the resource link to be created, relative to the
java:comp/env context.
| type |
The fully qualified Java class name expected by the web
application when it performs a lookup for this resource link.
| factory |
The fully qualified Java class name for the class creating these objects.
This class should implement the javax.naming.spi.ObjectFactory interface.
|
When the attribute factory="org.apache.naming.factory.DataSourceLinkFactory" the resource link can be used with
two additional attributes to allow a shared data source to be used with different credentials.
When these two additional attributes are used in combination with the javax.sql.DataSource
type, different contexts can share a global data source with different credentials.
Under the hood, what happens is that a call to getConnection()
is simply translated to a call
getConnection(username, password) on the global data source. This is an easy way to get code to be transparent to what schemas are being used,
yet be able to control connections (or pools) in the global configuration.
Attribute | Description |
---|
username |
username value for the getConnection(username, password)
call on the linked global DataSource.
| password |
password value for the getConnection(username, password)
call on the linked global DataSource.
|
Shared Data Source Example:
Warning: This feature works only if the global DataSource
supports getConnection(username, password) method.
Apache Commons DBCP pool that
Tomcat uses by default does not support it. See its Javadoc for
BasicDataSource class.
Apache Tomcat JDBC pool does support it,
but by default this support is disabled and can be enabled by
alternateUsernameAllowed attribute. See its documentation
for details.
<GlobalNamingResources>
...
<Resource name="sharedDataSource"
global="sharedDataSource"
type="javax.sql.DataSource"
factory="org.apache.tomcat.jdbc.pool.DataSourceFactory"
alternateUsernameAllowed="true"
username="bar"
password="barpass"
...
...
</GlobalNamingResources>
<Context path="/foo"...>
...
<ResourceLink
name="appDataSource"
global="sharedDataSource"
type="javax.sql.DataSource"
factory="org.apache.naming.factory.DataSourceLinkFactory"
username="foo"
password="foopass"
...
</Context>
<Context path="/bar"...>
...
<ResourceLink
name="appDataSource"
global="sharedDataSource"
type="javax.sql.DataSource"
...
</Context>
When a request for getConnection() is made in the
/foo context, the request is translated into
getConnection("foo","foopass") ,
while a request in the /bar gets passed straight through.
|
Transaction |
You can declare the characteristics of the UserTransaction
to be returned for JNDI lookup for java:comp/UserTransaction .
You MUST define an object factory class to instantiate
this object as well as the needed resource parameters as attributes of the
Transaction
element, and the properties used to configure that object factory.
The valid attributes for the <Transaction> element
are as follows:
Attribute | Description |
---|
factory |
The class name for the JNDI object factory.
|
|
Virtual webapp |
During development it may be more productive to avoid copying files (static
resources, JSPs, classes, jars...) and configure tomcat to use files from their
source locations. To do that, several customisations of the context configuration are
required:
- The
VirtualDirContext implementation of
Resources
- The
VirtualWebappLoader implementation of
Loader
scanAllDirectories="true" on the JarScanner
To illustrate this feature, here is an example of a standard maven webapp source tree:
mywebapp/
src/
main/
java/
resources/
webapp/
WEB-INF/
classes/
target/
classes/
To deploy such an application (assuming it also uses the log4j maven artefact),
the context configuration looks like:
<Context path="/mywebapp" docBase="/Users/theuser/mywebapp/src/main/webapp">
<Resources className="org.apache.naming.resources.VirtualDirContext"
extraResourcePaths="/WEB-INF/classes=/Users/theuser/mywebapp/target/classes" />
<Loader className="org.apache.catalina.loader.VirtualWebappLoader"
virtualClasspath="/Users/theuser/mywebapp/target/classes;/Users/theuser/.m2/repository/log4j/log4j/1.2.15/log4j-1.2.15.jar" />
<JarScanner scanAllDirectories="true" />
</Context>
Here is another example where the webapp serves pictures under /pictures and movies
under /movies and also depends on another maven project mylib that would normally
produce a jar to be packaged in WEB-INF/lib:
mylib/
src/
main/
java/
resources/
META-INF/
resources/
target/
classes/
mymovies/
mypictures/
mywebapp/
src/
main/
java/
resources/
webapp/
WEB-INF/
classes/
target/
classes/
The configuration is:
<Context path="/mywebapp" docBase="/Users/theuser/mywebapp/src/main/webapp">
<Resources className="org.apache.naming.resources.VirtualDirContext"
extraResourcePaths="/WEB-INF/classes=/Users/theuser/mywebapp/target/classes,/pictures=/Users/theuser/mypictures,/movies=/Users/theuser/mymovies" />
<Loader className="org.apache.catalina.loader.VirtualWebappLoader"
virtualClasspath="/Users/theuser/mywebapp/target/classes;/Users/theuser/mylib/target/classes;/Users/theuser/.m2/repository/log4j/log4j/1.2.15/log4j-1.2.15.jar" />
<JarScanner scanAllDirectories="true" />
</Context>
Note that resources in mylib/target/classes/META-INF/resources/ are mapped to / as
required by servlet 3 specification.
|
|
|